Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Inwood
Duct repair and sealing in Inwood typically runs $285 to $1,650 depending on how much of the run is accessible and whether the vertical chase is shared with the rest of the building. If you live in one of the pre-war co-ops along Seaman Avenue or a walk-up off Broadway, you already know the air in your apartment moves strangely. We work Inwood apartment by apartment and know what a 1920s building does to a duct run. Call (888) 219-1385 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Inwood Homeowners Call Air Duct Cleaning Highbridge for Duct Repair & Sealing
Inwood’s buildings are their own animal, and contractors who mostly work suburban houses tend to misread them. The local pros we connect you with have spent time in the walk-ups and elevator buildings between the Harlem River and Fort Tryon Park, and they know that a weak bathroom exhaust here is rarely solved by sealing one joint inside one apartment.
Our technicians have up to 14 years of experience, and the work is handled with Rotobrush and Nikro cleaning systems, the same equipment used in commercial HVAC work. We clean the system, then we seal it, because a leaky duct undoes everything you paid for. We show you what we found before we start and after we finish. The local pro is licensed and insured as their state requires, one flat price per system is agreed before work starts, and before-and-after photos of your own ducts come with the job.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Inwood
Most of what we do in Inwood tackles the same root problem: a building’s ductwork was sized and installed for a different era, and the leaks have been there far longer than anyone living in the apartment. Four services cover nearly every call.
Duct Sealing in Inwood Pre-War Buildings
Sealing is where the real gains are in these buildings. Original gravity and low-pressure ductwork has no mechanical assist, so even a small leak in a vertical chase drains the pressure that should reach your register. We seal accessible joints and seams in the apartment, and when the chase runs through the building, we coordinate with management before promising airflow.

Metal Duct Repair for City Coalitions and Canyon Winds
Crushed and disconnected metal runs are common in Inwood, partly because decades of cooking grease and city soot line the interiors and hide the breaks. The building canyon effect along the Harlem River pushes heating-season dust through any gap it can find. Metal duct repair reconnects those runs and restores a straight path for air.

Mastic Sealant and Air Leak Repair
Mastic sealant is the workhorse for sealing duct joints and seams in a pre-war apartment, but it only bonds to a clean surface. Grease residue makes adhesion unreliable until source removal clears the metal, so we clean before we seal. That’s part of why one call covers cleaning and repair rather than two separate vendors.

Flex Duct Repair
Plenty of Inwood apartments had flex duct added later, behind plaster walls or above dropped ceilings, when a PTAC or small split system went in. Those runs sag, tear, and pull loose at the collar. We locate the breach, reconnect the run, and seal it so the added system actually performs.
Duct Insulation
Cold, windy winters make uninsulated duct runs in exterior walls a comfort problem, not just an efficiency one. Insulation on accessible runs keeps heat where it belongs, and we check whether the run is worth insulating before we recommend it. Our duct repair & sealing work covers the full pathway: inspect, clean, repair, seal, and sanitize.
Why Inwood’s Vertical Exhaust Chases Make This a Building Question
Here’s the thing about Inwood that shapes almost every repair call: the neighborhood is dominated by early-20th-century apartment buildings, many still running original gravity or low-pressure ductwork and windowless inner bathrooms that depend on a shared exhaust riser. In the Park Terrace Gardens co-ops, those original interior bathroom exhaust systems run through vertical chases that are notoriously hard to access. That means apartment-level duct sealing often can’t succeed on its own. Before cleaning or sealing a single unit’s ducts, the technician has to assess whether the whole building’s system is even functional. In plenty of these buildings the roof fan failed long ago and nobody noticed, because a windowless bathroom just feels a little steamy rather than broken. Sealing a riser that has no fan pulling on it doesn’t restore airflow; it just seals a dead system. So we start with building management, camera inspection, and an honest answer about what the chase can and can’t do.

How a Typical Duct Repair Goes in an Inwood Apartment
A routine cleaning is often where the problem surfaces. A technician working through an Inwood pre-war apartment may find disconnected flex duct runs behind plaster walls, or crushed metal ducts inside the vertical chase serving the bathroom exhaust. From there the usual fix is camera inspection to locate the breach, then mastic sealant or metal duct repair to reconnect and seal the run, followed by a negative pressure test to confirm the system is actually moving air before the registers go back on. No guessing, no sealing over a problem we haven’t seen. We show you the camera footage and the before-and-after photos of your own ducts.
Trusted Brands We Service in Inwood
Our equipment includes Rotobrush and Nikro cleaning systems and Abatement Technologies air-filtration gear, which matters in buildings where contaminant control is the whole point. For air-quality upgrades we supply and install Honeywell and Aprilaire products, covering filtration and humidity control, and Guardsman-grade protective products go into the sanitizing step. One call covers cleaning, repair, and air-quality upgrades, so you’re not juggling a second vendor for a filter housing or a humidifier. Call (888) 219-1385 and we’ll walk you through what fits your building.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Inwood Homes
- Leaks that kill a gravity system. Original gravity or low-pressure ductwork in 1910s to 1930s buildings has no mechanical assist, so even small leaks in a vertical chase make the system ineffective, and sealing it properly usually needs building-wide coordination.
- Windowless bathrooms on a dead riser. Inner bathrooms rely on exhaust risers that may connect to a failed roof fan, so duct sealing alone won’t restore airflow until the shared system is assessed and repaired.
- Grease and soot masking broken joints. Decades of cooking grease and city soot coat duct interiors, hiding disconnected joints and making mastic adhesion unreliable until source removal and agitation tools clear the surfaces.
- Later flex runs behind plaster. PTAC and split systems added to pre-war units often left flex duct sagging or torn behind walls, and those runs pull loose at the collar over time.
Pricing for Duct Repair & Sealing in Inwood, NY
Honest ranges for Inwood, based on the kind of building stock here. A typical mastic sealing job on accessible apartment ductwork runs $285 to $650. Metal duct repair on a crushed or disconnected run usually lands between $350 and $900, and if the breach sits inside a shared vertical chase that needs camera inspection and management coordination, plan on $600 to $1,650. Duct insulation on accessible runs is generally $400 to $1,200. These are estimates, not quotes: the written estimate sets the final price, and the estimate itself is free. We quote per system, never per vent, and one flat price is agreed before any work starts.
We Also Serve Cities Near Inwood
We take Inwood calls alongside the neighboring neighborhoods: University Heights, Washington Heights, Bedford Park, and Fordham. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your building sits near the line between Inwood and University Heights, tell us the cross streets when you call and we’ll sort out the right scheduling.
Serving Inwood, NY – Our Local Coverage Area
We serve Inwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Inwood
Sometimes, but not always, and anyone who promises a fix sight-unseen is guessing. Weak exhaust in a windowless inner bathroom usually means the shared riser or roof fan isn’t pulling air, and sealing an apartment-level joint won’t restore airflow if the riser behind it is dead. We assess the chase with camera inspection and building management before recommending the fix. Call (888) 219-1385 for an exact quote, and estimates are free.
It usually starts with camera inspection of the vertical chase, then a plain answer about whether the shared system is functional. From there, the work is mastic sealant or metal duct repair to reconnect and seal the run, followed by a negative pressure test to confirm the system moves air before registers go back on. In co-ops with original bathroom exhaust systems, we coordinate with building management first. Call (888) 219-1385 and we’ll talk through what your building needs.
Original ductwork is the default in Inwood’s 1910s to 1930s buildings, so if your apartment sits in one of those, it’s likely original until proven otherwise. Signs it needs sealing: weak airflow at registers, stuffy inner rooms, dust settling fast after a clean, and heating bills that don’t match the apartment’s size. The reliable check is camera inspection. Call (888) 219-1385 for an exact quote, and estimates are free.
Yes, once the ducts are clean and the leaks are sealed. Sealing stops the draw of dust, soot, and grease-coated particles from wall cavities and shared chases back into your living space, and that’s where Abatement Technologies filtration and Guardsman-grade sanitizing come in. Sealing a dirty duct just traps the problem, so we clean first. Call (888) 219-1385 for an exact quote, and estimates are free.
Commercial-grade mastic sealant and metal duct repair materials paired with Rotobrush and Nikro cleaning systems, plus Abatement Technologies filtration for contaminant control. The point of professional gear is that it reaches the inside of a greasy pre-war duct and seals a surface that’s actually clean. Consumer-grade setups don’t get there. Call (888) 219-1385 for an exact quote, and estimates are free.
Call (888) 219-1385 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system is agreed before work starts, before-and-after photos of your own ducts come with the job, and the local pro is licensed and insured as their state requires.
Written by the team at Air Duct Cleaning Highbridge.